Expansion joints can be manufactured from a number of different materials. The material of choice for high performance expansion joints depends on the application. For example, natural or synthetic rubber are ideal for abrasive materials, while PTFE is the best choice for chemical applications. Another common material is Neoprene. The choice is also dependent on the type of fluid that is flowing. If the fluid is liquid, the elastomer needs to have a minimum elongation factor of 200% at 0degF.
The type of material used for the lining of a tube is also critical. Fluoroplastic liners can be manufactured to handle a wide range of media. They are characterized by superior chemical resistance and are used in a variety of industrial applications. They cover all of the internal surfaces of the tube. They can be added to an existing expansion joint if needed.
The lining of a tube is a significant feature of an expansion joint. It helps to eliminate the possibility of fluids entering the joint and the carcass. There are various materials that can be used, including fluoroplastics, TFE, and FEP. There are also specialized polymers that can be added to provide additional protection.
The lining of a tube can be made to be leak proof, if desired. In addition, the lining can be constructed to accommodate multiple elastomer products. For example, an elastomeric epoxy can be mixed with dry blasting sand to form a nonslump mortar consistency. ThisĀ rubber expansion joint secondary seal will prevent contaminants from entering the concrete.
There are a variety of elastomers that can be utilized for the construction of high performance rubber expansion joints. Some of the more commonly used elastomers include EPDM, nitrile, and PTFE. Each of these elastomers has differing properties, so it is important to choose the appropriate material for the specific application. For example, a pure gum rubber is ideal for abrasive materials, but an EPDM material has better physical properties. For raw sewage, nitrile is the most appropriate choice.
The internal metal reinforcement of an expansion joint is typically steel. A typical wall thickness is approximately 0.15mm to 2mm. However, this size is too large for efficient placement of cords. The lining of a joint can be made to be either welded or manually applied.
The design of an expansion joint can be optimized using Finite Element Analysis. The results of the FEA model can be validated through product testing and manufacturing. By optimizing the design, the system can be more efficient and will save up to 50% of the materials used. This can lead to savings in both production costs and performance. The use of FEA has been successfully applied to optimize the design of rubber expansion joints.
The main function of an expansion joint is to absorb axial and lateral movements of a piping system. When designing an expansion joint, it is important to calculate the resultant movement. The resultant movement is the force that is required to move the expansion joint its rated movement. This calculation ensures that the joint can compensate for any induced movement.