If your garage door has started to become noisy, there are several things you can check yourself to fix the problem. For example, if you hear a rattling noise when the door opens or closes, it could be a loose piece of hardware. This problem can easily be fixed by tightening the hardware. However, if the noise continues, it may be due to a problem with the torsion springs. Torsion springs can become loose and lose lubrication. This can result in a popping sound when opening or closing. Changing torsion springs yourself can be a dangerous job, so it is recommended to have a professional handle the job.
Fixing a bent garage door
If you’ve bent your garage door, you might be wondering how to fix it. The good news is that it’s a relatively simple task. Generally, the bend isn’t more than a cosmetic dent, so you can probably do it yourself with basic tools and skills. However, if the bending is too serious or has spread to other panels, you’ll need to contact a professional repair service.
First, place a block of wood on the side of the door that has the bend or dent. This block of wood should be placed on the outside of the bent garage door.
Replacing a broken spring
Replacing a broken spring for garage doors can be a tricky task. Some tradesmen have trouble measuring the torsion spring correctly. This can lead to wasted time and money. Luckily, there are a few simple steps you can take to fix your broken spring.
First, you should take off the torsion tube. This will allow you to remove the cable drum. Next, you should remove the old spring from the tube. You can measure the length of each spring coil by placing a hook between the two ends. You can then divide the length of the spring by 20 or 40 to get the wire diameter.
Replacing weather stripping
Replacing weather stripping is an important part of a garage door repair. It can prevent drafts and pests from entering your garage, and it can also prevent air from escaping. This garage door repair vinyl rubber seal is placed around the perimeter of the door to protect it from weather. Over time, however, these seals can begin to break down and need replacement. If you notice that your garage door’s weatherstripping is in need of repair, contact a garage door repair service provider.
To replace the weather stripping on a garage door, first remove the old one. To ensure a perfect fit, make sure that the new stripping is cut to the correct size. Also, use a power tool to attach the weather stripping. The professional will check the seal to make sure it is installed properly. The bottom seal of your garage door may also need replacement. If it is warped or cracked, or if you’re noticing that pests have started to invade your garage, you should replace it.
Replacing a broken cable
Replacing a broken cable on your garage door can be a simple repair job. Cables are made of heavy-duty galvanized wire that is designed to last for years. However, sometimes a cable breaks or gets frayed, which causes the door to move sideways or off track. Ultimately, it can damage other parts of the door.
When replacing a cable, you need to make sure that you select the correct one for your garage door. If you have a tall door, you’ll need a larger cable than if you have a shorter one. Make sure that you wear the appropriate clothing and protective eyewear. You should also wear work boots and gloves when working with cables. You should also watch out for sharp edges and small frays when working on the cable.